Maharishi Channel is changing its broadcast settings for India on September 30, 2006.

To continue to receive the Maharishi Channel
you must re-program your receiver using the following procedure
which will change the frequency and symbol rate settings.
Procedure to Change Your Receiver

Click Here to view these instructions in Hindi

Read these instructions 3 to 4 times before making these changes in your receiver!

The Maharishi Channel receiver should be turned on and connected to your TV screen.

On the Front Side of the receiver (fig 1), locate the following buttons (from left to right) that will be used to make the required change of settings:

3 buttons on the left side : Power, Menu/Exit, OK
4 buttons on the right side: Left, Right, Up, Down

Fig 1

1. Press the "Menu/Exit" button to display the "Main Menu" on your video or TV screen (fig 2).

If you cannot see any picture from your Maharishi Receiver, please contact the Maharishi Center for assistance or call the following number in Maharishi Nagar, Tel : 91 (0)120 456 2267 and you will be guided step by step.

Please note that passwords for re-setting receivers can only be used one time.
If you are unsuccessful in making these changes, you will need to call the
number above to get a new password or
email me on uplink1<at>attglobal.net (please replace <at> with @).

Jai Guru Dev

Previous Page 1, 2, Next